88 Part Number STH025 8/12
MANUAL HARVEST
Press the Checkmark with Manual Harvest highlighted
to initiate a manual harvest.
Manual Harvest
• Harvest Started
• Exit
REPLACE CONTROL BOARD
Press the Checkmark with Replace Control Board
highlighted to program the replacement control board.
The data can copied from the defective control board
(refer to “Exporting Data to a Flash Drive” on page 98),
or entered manually through the Indigo interface.
• Manual Setup
• Board Install Date
• Input Model Number
• Input Serial Number
• Condenser/condensing unit serial number
• USB Setup
• Insert Drive
• Press Checkmark and wait for completion
• Exit
USB SETUP
• USB Stick
• Download Firmware
Insert drive and wait for completion
• Download Configuration
Insert drive and wait for completion
• Export All
Insert drive and wait for completion
• Export Setup
Insert drive and wait for completion
• Exit
To Next Page
Loading...
Need help?
General