Part Number STH025 8/12 97
Control Board
10. Follow the on-screen instructions:
A. Insert Drive (Insert the flash drive into the
USB port on the ice machine’s control board.)
B. Press Check (Press the Checkmark.) Do not
remove flash drive, touch display buttons or
remove power while firmware is updating.
C. Wait For Comp (Wait approximately 5 to 10
minutes for the Firmware upgrade to
complete. The display will return to the home
screen in the off mode.
11. Reboot control board by removing power for 15
seconds and reapplying power.
12. Verify the new firmware version loaded by
navigating to Menu/Machine information/Main
Software Version and verify the firmware version
number.
To Next Page
Loading...
Need help?
General