EasyManuals Logo
Home>Manitowoc>Ice Maker>CVDT1200

Manitowoc CVDT1200 Technician's Handbook

Manitowoc CVDT1200
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #175 background imageLoading...
Page #175 background image
Part Number: 000015431 Rev01 5/19 175
LIQUID LINE FILTER-DRIERS
The filter-driers used on Manitowoc ice machines are
manufactured to Manitowoc specifications. A Manitowoc
drier has dirt-retaining filtration, with fiberglass filters
on both the inlet and outlet ends. This is very important
because ice machines have a back-flushing action that
takes place during every Harvest cycle.
The size of the filter-drier is important. The refrigerant
charge is critical. Using an improperly sized filter-drier
will cause the ice machine to be improperly charged with
refrigerant.
Important
Driers are covered as a warranty part. The drier must
be replaced any time the system is opened for repairs.
SUCTION FILTER

traps particulate only, and do not contain a desiccant. The
filter needs replacement when:
1. The pressure drop across the drier exceeds 2 psig.
2. A compressor is replaced.
3. Refrigeration system contains contaminants.

Table of Contents

Other manuals for Manitowoc CVDT1200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc CVDT1200 and is the answer not in the manual?

Manitowoc CVDT1200 Specifications

General IconGeneral
BrandManitowoc
ModelCVDT1200
CategoryIce Maker
LanguageEnglish

Related product manuals