26 Part Number: 000015431 Rev01 5/19
Location of Ice Machine
HEAD SECTION
The location selected for the ice machine head section
must meet the following criteria. If any of these criteria are
not met, select another location.
• The location must be free of airborne and other
contaminants.
• The air temperature must be at least 35°F (1.6°C), but
must not exceed 110°F (43°C).
• Ice Making Water Inlet - Water Pressure must be
at least 20 psi (1.4 bar), but must not exceed 80 psi
(5.5 bar).
• The location must not be near heat-generating
equipment or in direct sunlight and protected from
weather.
• The ice machine must be protected if it will be
subjected to temperatures below 32°F (0°C). Failure
caused by exposure to freezing temperatures is not
covered by the warranty.
To Next Page
Loading...
Need help?
General