Manitowoc Grove 5540F User Manual

GROVE Published 10-21-2011, Control # 055-03 5-1
5540F/YB5515 OPERATOR’S MANUAL ATTACHMENTS
5
SECTION 5
ATTACHMENTS
SECTION CONTENTS
Hoist Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Removing the Hoist Block. . . . . . . . . . . . . . . . . . . 5-1
Installing the Hoist Block. . . . . . . . . . . . . . . . . . . . 5-2
Fourth Boom Section . . . . . . . . . . . . . . . . . . . . . . . 5-2
Extending the Fourth Boom Section . . . . . . . . . . . 5-2
Retracting the Fourth Boom Section. . . . . . . . . . . 5-4
Boom Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Installing the Boom Extension . . . . . . . . . . . . . . . 5-5
Stowing the Boom Extension. . . . . . . . . . . . . . . . . 5-5
Down Haul Weight. . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Installing the Down Haul Weight . . . . . . . . . . . . . . 5-7
Removing the Down Haul Weight . . . . . . . . . . . . . 5-8
Installing Cable On The Hoist. . . . . . . . . . . . . . . . . 5-8
Wire Rope Wedge Socket . . . . . . . . . . . . . . . . . . . . 5-9
4 Part Wire Rope Reeving. . . . . . . . . . . . . . . . . . . 5-11
HOIST BLOCK
Removing the Hoist Block
1. Lower the hoist block to the ground to place slack in the
wire rope.
2. Remove the bolt and nut (Figure 5-1) securing the rope
wedge socket to the boom head. Remove the wire rope
dead end socket.
NOTE: When removing the hoist block to install the hook
and ball assembly, the wire rope dead end
assembly does not have to be disassembled.
3. Remove the three pins as indicated in Figure 5-2.
Remove the hook assembly.
4. Pull the wire rope and dead end though the hoist block.
5. Install the hook assembly and four pins.
CAUTION
Ensure that the hook assembly’s safety latch (Figure 5-2)
does not get damaged.
p1623
Wire Rope Wedge Socket Pin
FIGURE 5-1
Reference Only

Manitowoc Grove 5540F Specifications

General

Brand	Manitowoc
Model	Grove 5540F
Category	Construction Equipment
Language	English