EasyManuals Logo
Home>Manitowoc>Ice Maker>Indigo ID0906A

Manitowoc Indigo ID0906A User Manual

Manitowoc Indigo ID0906A
296 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
Part Number STH025 11/16 155
SYMPTOM #3 & #4 HARVEST PROBLEMS
SELFCONTAINED AIR, WATER & REMOTE
CONDENSER MODELS
Normal Ice Cube Melted Out ice Cube
Definition of a harvest problem; At the end of a 3.5
minute harvest cycle the slab of ice is still contacting the
evaporator. The slab of ice may or may not be removable
by hand.
Harvest problems can be split into two symptoms.
Symptom 3 - Normal sheet of cubes at the end of
the harvest cycle. Ice is difficult to remove from the
evaporator by hand. Once removed the back of the
cubes are square and show no signs of melting. This
indicates a refrigeration problem. The source of the
problem could be in the freeze or harvest cycle. Use
the appropriate flow chart (in Troubleshooting) to
determine the cause of the problem.
Symptom 4 - Melted sheet of cubes at the end of
the harvest cycle. Ice can be removed rather easily
by hand. The back of the cubes are misshapen and
melted. This indicates something is preventing the ice
slab from releasing. Follow the appropriate flow chart
(in Troubleshooting) to determine the cause of the
problem. A manual cleaning procedure must always
be performed when this problem is encountered.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Indigo ID0906A and is the answer not in the manual?

Manitowoc Indigo ID0906A Specifications

General IconGeneral
BrandManitowoc
ModelIndigo ID0906A
CategoryIce Maker
LanguageEnglish

Related product manuals