Part Number STH025 11/16 53
Removal from Service/Winterization
General
Special precautions must be taken if the ice machine is
to be removed from service for an extended period of
time or exposed to ambient temperatures of 32°F (0°C) or
below.
,
Caution
If water is allowed to remain in the ice machine in
freezing temperatures, severe damage to some
components could result. Damage of this nature is
not covered by the warranty.
Follow the applicable procedure below.
AIRCOOLED ICE MACHINES
1. Press the power button.
2. Turn off the water supply.
3. Remove the water from the water trough.
4. Disconnect and drain the incoming ice-making
water line at the rear of the ice machine.
5. Energize the ice machine and wait one minute for
the water inlet valve to open.
6. Blow compressed air in both the incoming water and
the drain openings in the rear of the ice machine
until no more water comes out of the water inlet
lines or the drain.
7. Disconnect the electric power at the circuit breaker
or the electric service switch.
8. Make sure water is not trapped in any of the water
lines, drain lines, distribution tubes, etc.
To Next Page
Loading...
Need help?
General