Manitowoc Indigo ID0906A User Manual

168 Part Number STH025 11/16
5. Scroll down until brackets are in the space below
“Input Model #”. Press the right arrow to activate
the blinking cursor, then use the up/down arrows
to select the first character in the model number.
Use the right arrow to move to the next space. Add
characters in this manner until the model number
is complete. The model must include the dash and
the last three numbers to indicate the electrical
requirements ( example -261). Press the right arrow
until the cursor disappears.
6. Scroll down until brackets are in the space below
“Input Serial#”. Press the right arrow to activate the
blinking cursor, then use the up/down arrows to
select the first character in the serial number. Use
the right arrow to move to the next space. Add
characters in this manner until the serial number
is complete. Press the right arrow until the cursor
disappears.
7. Scroll down and select exit, then press checkmark.
8. Reboot ice machine by disconnecting power for a
minimum of 15 seconds, then reapply power.

Manitowoc Indigo ID0906A Specifications

General

Brand	Manitowoc
Model	Indigo ID0906A
Category	Ice Maker
Language	English

Summary

Maintenance

Cleaning and Sanitizing Procedures

Procedures for regular cleaning and sanitizing to maintain hygiene and performance.

Preventative Maintenance Cleaning

Service Menu and Diagnostics

Service Menu Options

Operational Checks

Sequence of Operation

Troubleshooting Safety Limits

Explains safety limits that halt operation to prevent damage and their triggers.

Troubleshooting by Symptom

Symptom #1 Ice Machine Stops Running

Flowchart to diagnose issues causing the ice machine to stop operating.

Symptom #2 Long Freeze Cycle/Low Production

Flowchart for diagnosing issues related to slow ice production or extended freeze times.

Symptom #3 No Harvest/Ice Not Melted

Flowchart for troubleshooting harvest problems where ice does not release properly.

Symptom #4 No Harvest/Ice Melted

Flowchart for diagnosing harvest issues involving melted or misshapen ice cubes.

Component Check Procedures

Electrical Component Diagnostics

Procedures for testing electrical parts including control boards, fuses, and switches.

Refrigeration Component Diagnostics

Procedures for diagnosing and testing refrigeration system parts like valves and compressors.

Diagrams

Wiring Diagrams

Refrigeration Tubing Schematics