92 Part Number STH025 11/16
Windows XP Computers:
1. Insert USB flash drive; your computer may indicate:
• “Found New Hardware” follow the prompts to
install the USB flash drive
• USB flash drive may auto launch - Close auto
launch window.
2. To access Disk Management:
• Left click on the Windows Start Button
• Left click on “Run”
• Type compmgmt.msc and left click on “OK”
• Left click on “Disk Management”.
3. Verify USB flash drive capacity is 2 GB or less
4. Right click on the USB flash drive, then left click on
“Format” from the drop down list.
5. Verify or select the settings below:
• Volume Label is Optional - Rename if desired
• File System - Fat32
• Allocation Unit Size must be 512 MB
• Deselect “Perform A Quick Format” (no
checkmark)
6. Left click on “OK” you will receive a warning -
“Formatting will remove all data” left click on “OK”,
wait until formatting is complete and “status”
indicates “Healthy”, then close the disk management
window.
To Next Page
Loading...
Need help?
General