120 Part Number STH025 11/16
RESET TO FACTORY DEFAULTS
Before starting troubleshooting procedures, reset the
control board to factory defaults to prevent
mis-diagnosis. Before resetting to factory defaults do one
of the following:
A. Copy settings to a usb device and flash settings
into the control board when diagnostics are
complete.
B. Write down any customer settings so they can
be re-entered when diagnostics are complete.
This procedure also resets the password to the factory
default. The default factory password is 1234. To reset the
ice machine to factory defaults refer to “Password Entry”
on page 63.
To Next Page
Loading...
Need help?
General