Part Number STH042 3/14 53
Safety Limit 3
If the freeze time reaches 4 minutes and water is not
sensed (float remains down for 10 continuous
seconds) the ice machine stops.
• Safety Limit 3 is bypassed on the initial cycle
(manual start or after a full bin/safety limit
condition). For all subsequent cycles if the freeze
time reaches 4 minutes and water is not sensed,
the ice machine stops and initiates a 30 minute
delay period. Control board lights SL#1 and SL#2
along with the touch pad service (wrench) light will
flash on/off at 1 second intervals.
• The ice machine automatically restarts at the end
of the 30 minute delay period and stops flashing
the control board and service (wrench) lights.
• If 100 consecutive failures occur the ice machine
stops and the touch pad service (wrench) light
remains energized.
To Next Page
Loading...
Need help?
General