Part Number STH039 8/13 83
Component Check Procedures
Main Fuse
Function
The control board fuse stops ice machine operation if
electrical components fail causing high amp draw.
Specifications
The main fuse is 250 Volt, 10 amp.
Check Procedure
1. If the bin switch light is on with the ice damper
closed, the fuse is good.
2. Remove the fuse. Check the resistance across
the fuse with an ohmmeter.
High (line) voltage is applied to the control board
at all times. Removing the control board fuse or
moving the toggle switch to OFF will not remove
the power supplied to the control board.
To Next Page
Loading...
Need help?
General