178 Part Number 80-1505-3 6/11
Water Curtain/Ice Damper Removal Notes
The water curtain must be on (bin switch closed) to
start ice making. While a Freeze cycle is in progress,
the water curtain can be removed and installed at any
time without interfering with the electrical control
sequence.
If the ice machine goes into Harvest sequence while
the water curtain is removed, one of the following will
happen:
• Water curtain remains off:
When the Harvest cycle time reaches 3.5 minutes
and the bin switch is not closed, the ice machine
stops as though the bin were full.
• Water curtain is put back on:
If the bin switch closes prior to reaching the
3.5-minute point, the ice machine immediately
returns to another Freeze sequence pre chill.
To Next Page
Loading...
Need help?
General