44
Water System Checklist
A water-related problem often causes the same
symptoms as a refrigeration system component
malfunction.
Water system problems must be identified and
eliminated prior to replacing refrigeration components.
Water area (evaporator) is dirty
• Clean as needed
Water inlet pressure not between 1.4 and 5.5 bar
• Install a water regulator valve or increase the water
pressure
Incoming water temperature is not between
1.7°C and 32.2°C
• If too hot, check the hot water line check valves in
other store equipment
Water filtration is plugged (if used)
• Install a new water filter
Hoses, fittings, etc., are leaking water
• Repair/replace as needed
Water inlet valve is stuck open or closed
• Clean/replace as needed
Water is spraying out of the sump trough area
• Stop the water spray
Uneven water flow across the evaporator
• Clean the ice machine
To Next Page
Loading...
Need help?
General