Marshall Amplification Acton Bluetooth User Manual

TROUBLESHOOTING
021.
THE ACTON
BLUETOOTH DOES
NOT TURN ON.
The speaker is not connected
to AC mains.
Ensure that the ACTON
BLUETOOTH is plugged into
a working AC wall socket, see
page
010.
Slightly increase the volume
on your sound source, then
slightly increase the volume
on the speaker, see
019.
Ensure that the audio cable
is properly connected, see
page
016.
Slightly increase the volume
on your sound source, then
slightly increase the volume
on the speaker, see
019.
Decrease the volume on your
sound source.
Lower the volume or bass on
the ACTON BLUETOOTH, see
page
019.
PROBLEM CAUSE ACTION
THERE IS NO
SOUND
THE SOUND IS TO
LOW
THERE IS A
CRACKLING SOUND
Wrong input for audio source is
selected.
Sound source not connected
via Bluetooth or cable.
The audio cable is not properly
connected.
Volume is set too low on
either the sound source or the
ACTON BLUETOOTH.
The amplifier is clipping as it
has run out of output power.
Volume is set too low on
either the sound source or
the ACTON BLUETOOTH.
Connect the sound source to
the speaker, see page
013. or
016.
Change the selected sound
source, see page
018.

Marshall Amplification Acton Bluetooth Specifications

General

Brand	Marshall Amplification
Model	Acton Bluetooth
Category	Speakers
Language	English