Technical specifications
01B01-6
MF 400Xtra
01
13. Filling capacity - in liters
Fuel tank .................................................................................................... 100 100 100 100 100 115 e 85 115 e 85 115 e 85
Engine sump ............................................................................................. 7,1 / 8,1 8,1 / 9,1 8,1 / 9,1 8,1 / 9,1 5,5 / 7,5 13 13 13
Cooling system .......................................................................................... 14,5 14,5 14,5 14,5 18 24 24 24
Transmission and hydraulics ....................................................................It varies from 42 to 47 liters, depending on tractor configuration. Always take into consideration the correct levels by using the dipstick. In addition, when coupling an
implement with auxiliary hydraulic control valves, add oil to the transmission as necessary, so as the recommended level be kept at all times.
Rear epicyclic hubs (each) ....................................................................... 2,0 2,0 2,0 3,0 3,0 3,0 3,0 10
Front axle (4WD):
Differential .................................................................................................. Carraro Ca 20.14 = 5,0 / Ca 20.18 e 20.121 = 4,5
Reducers ................................................................................................... Carraro Ca 20.14 = 0,7 / Ca 20.18 e 20.121 = 1,0
Brakes........................................................................................................ 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3
14. Approved lubricants and additives
Fuel tank ................................................................................................... Diesel Oil - with maximum sulphur content = 0.5%
Engine sump ............................................................................................ SAE 15W 40 API CF-4 Multigrade.
Cooling system ......................................................................................... Running water with ethylene glycol based antifreeze and anticorrosion additive.
Transmission and hydraulics ................................................................... SAE 10W-30 API GL -4/SF - GL-4 MF CMS M1143.
Front and rear final drive .......................................................................... SAE 90 API GL 5 MIL-L-2105 B
4WD front differential ................................................................................ SAE 90 API GL 5 MIL-L-2105 B
15. Cab and air conditioning
Condenser......................... ........................................................................ Located in front of the water cooler
Compressor........................ ...................................................................... Belt driven, from fan pulley
Refrigerant ................................................................................................ R-134A / 1.7 kg (3.74 lb).
Air filtering ................................................................................................. Paper element located on the left side of cab roof.
MF 425 MF 435 MF 440 MF 445 MF 455 MF 460 MF 470 MF 480
To Next Page
Loading...
Need help?
General
