03
04
1.3 Part name
Note (Important safety information. Refer to the
operation manual).
Dangerous electric conductor.
Double insulation protection (class II).
CAT III According to pulse voltage tolerance protection
level provided by IEC 61010-1 standard
overvoltage (installation) level III and grade
2 for pollution.
The meter complies with EU standard
Ground (earth)
1.4 Maintenance
1.4.1 Don't try to open the meter bottom case to adjust or
repair. Such operations only can be made by
qualified technicians who fully understand the
meter and electrical shock hazard.
1.4.2 Before opening the meter bottom case or battery
cover, remove probe from the circuit to be measured.
1.4.3 To avoid wrong readings and potential electric
shock, when “ ”appears on the meter display,
replace the battery immediately.
1.4.4 Clean the meter with damp cloth and mild
detergent. Do not use abrasives or solvents.
1.4.5 Power off the meter when it is not used. Switch the
transfer switch to OFF position.
1.4.6 If the meter is not used for long time, please take
the battery out to prevent the meter being damaged.
1.2.10 Don't measure capacitance unless the capacitor
is discharged completely.
1.2.11 Don't use the meter in explosive gas, vapor or
dusty environments.
1.2.12 If you find any abnormal condition or failure on
the meter, stop using the meter and have it
serviced by a qualified technician.
1.2.13 Unless the meter bottom case and the battery
cover are completely fastened in their original
places, do not use the meter.
1.2.14 Don't store or use the meter in direct sunlight,
high temperature or high humidity.
2. Description
- The meter is a portable, professional measuring
instrument with LCD display and back light for easy
reading by users. Measuring range switch is operated
by single hand for easy operation. The meter has
overload protection and low battery indicator. It is an
ideal multifunction meter for professionals, factories,
schools, fans and family use.
- The meter is used to measure AC current, DC current,
voltage, DC voltage, frequency, duty ratio, resistance,
capacitance, circuit connections, diodes, non-contact
voltages and temperatures.
- The meter has an auto measuring range function.
- The meter has a reading hold function.
- The meter has a max. measuring function.
- The meter has a min. measuring function.
To Next Page
Loading...
Need help?
General
