Mastech MS2109A User Manual

13
14
Resolution
Accuracy
600Ω
6kΩ
0.1kΩ
0.001kΩ
0.1Ω
0.01kΩ
0.1MΩ
0.001MΩ
Function
0.001V
If the resistance of circuit to be
measured is less than 70Ω, the
meter's built-in buzzer may sound.
3.2.6.2 Through grade V:
- Frequency response: 40 ~ 10kHz
- Input voltage range: > 600mV AC
- Input impedance: 10MΩ
- Maximum input voltage: 600V AC (RMS)
3.2.6.2 Through grade HZ/DUTY:
- Frequency response: 1 ~ 10MHz
- The input voltage range: >2V AC (RMS) (input
voltage will increase when the frequency to be
measured increases)
- Maximum input voltage: 250V AC (RMS)
3.2.7 Resistance
60kΩ
600kΩ
6MΩ
60MΩ
±(1.2% of reading + 3 digits)
- Open circuit voltage: about 0.4V
- Overload protection: 250V DC or AC (RMS)
3.2.8 Circuit Continuity Test
- Overload protection: 250V DC or AC (RMS)
0.1Ω
Display approximate diode
forward voltage value
3.2.10 Diode Test
- Forward DC current is about 1mA
- Backward DC voltage is about 3.3V
- Overload protection: 250V DC or AC (RMS)
Accuracy
40nF
±(4.0% of reading + 5 digits)
0.01μF
0.1nF
0.01nF
0.001μF
0.001mF
0.1μF
3.2.9 Capacitance
4μF
- Overload protection: 250V DC or AC (RMS)
400nF
40μF
400μF
4000μF
3.2.6.1Through grade A (from clamp head):
- Frequency response: 40 ~ 1kHz
- Input current range: >6A AC (RMS)
- Maximum input current: AC 600A
3.2.6 Duty Ratio
Measuring range
Resolution
Accuracy
0.1%-99.9% 0.1%
±(3%+5)
Measuring range
±(0.8% of reading + 3 digits)
Measuring
range
Resolution
Measuring
range
Resolution
Measuring
range
Resolution Function

Mastech MS2109A Specifications

General

Brand	Mastech
Model	MS2109A
Category	Measuring Instruments
Language	English