16
MAINTAINANCE
BEFORE EACH USE
1. Inspect the jigsaw, the trigger switch and the accessories for damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect
the operation.
4. If abnormal vibration or noise occurs, turn off the tool immediately and have the problem corrected
before further use. Detach the battery before cleaning or performing any maintenance. Using compressed
air may be the most effective cleaning method. Always wear safety goggles when cleaning tools using
compressed air.
MAINTENANCE
WARNING!
• Do not allow brake fluids, gasoline, other petroleum-based products, penetrating oil, etc. to come into contact
with plastic parts. These substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard or
cause damage to the product.
• Use only accessories that are recommended for this jigsaw by the manufacturer. Accessories that may be
suitable for one tool may become hazardous when used with another tool.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting
edges are less likely to bind, and are easier to control.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
To Next Page
Loading...
Need help?
General
