EasyManuals Logo
Home>MasterCraft>Boat>X-2 2008

MasterCraft X-2 2008 User Manual

MasterCraft X-2 2008
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
2008 MasterCraft Owners Manual Page 15-8
Inspect the Complete Fuel System for
Leakage
Although the boat engine is similar to an automobile en-
gine, the engine compartment differs substantially. The
underside of an automobile engine compartment is to-
tally open to the atmosphere. This allows complete air
circulation and ventilation. A boat engine is housed in a
closed compartment, the underside of which is the bot-
tom (hull) of the boat.
The enclosed engine compartment limits the ventilation
of gasoline and oil fumes. Because conned gasoline
vapors mixed with a little air can form an explosive atmo-
sphere, it is important to be especially vigilant in perform-
ing the following two (2) operations:
Step 1: Run the bilge blower for at least four (4) min-
utes to ventilate the bilge area each time before starting
the engine.
Step 2: Inspect the boat bilge area under the engine for
the evidence of oil and gasoline—or any gasoline odor.
This inspection should take place the rst time the boat
is started each day. Raise the engine cover and visually
look at the bilge area under the engine.
Gasoline is explosive. If a gasoline odor is present
or gasoline is visually observed in the bilge area
during inspection, DO NOT START YOUR EN-
GINE! Remove the ignition key from the ignition
switch and call an authorized MasterCraft dealer
for service.
Note: Ifthere is evidenceofloose fuel ttings,
deteriorated lines or other problems associated
withthefuelsystem,callanauthorizedMasterCraft
dealer.Fuelsystemserviceonlater-modelMaster-
Craft boats require special service tools and spe-
cial training. Due tothe potentialfor serious con-
sequenceswhenerrorsoccurinservicingthefuel
system, MasterCraft strongly encourages all boat
owners to seek professional assistance from an
authorizedMasterCraftdealer’sservicedepartment
whenever any service or perceived problems occur
within the fuel system.
All replaced fuel components must meet United
States Coast Guard (“USCG”) and American Boat
& Yacht Council, Inc. (“ABYC”) standards, and
must be Underwriters Laboratory (“UL”)-ap-
proved. Inferior quality components pose a seri-
ous safety threat to you and others, and the use of
inferior components may result in serious injury
or death. Resulting damage may void the war-
ranty.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft X-2 2008 and is the answer not in the manual?

MasterCraft X-2 2008 Specifications

General IconGeneral
BrandMasterCraft
ModelX-2 2008
CategoryBoat
LanguageEnglish

Related product manuals