Matrix G7-S13 User Manual

22
Before fully tightening the pivot block, ensure that the arms are symmetrical about the centerline of
themachine.Theleftandrighthandgripsshouldbeatthesamedistancefore&afttoeachother
andbeequidistanttothecenterlineoftheuser.
ASSEMBLY
STEP 5 | ARM POSITIONING INSTRUCTIONS & NOTES
PART 4: ARM ASSEMBLY
ID DESCRIPTION QUANITY
Option ArmLeveling&Positioningxture 1
Tie Rod lengths must be adjusted according to machine.
To adjust length: loosen jam nuts, turn center rod, tighten jam nuts.
Machine Tie Rod Length (“X”)
Chest Press 722.5 mm (28.4”)
Shoulder Press 360.0 mm (14.2”)
Lat Pulldown 555.0 mm (21.9”)
Seated Row 350.0 mm (13.8”)
"X"
Jam Nut
Jam Nut
Optional Jig
Tightenpivotblockto77N-m/57ft-lbs.
Tighten four bolts of pivot block, and then back out one bolt to apply red Loctite
272,replacebolttopropertorque.Repeatstepsforthreeremainingbollts

Matrix G7-S13 Specifications

General

Brand	Matrix
Model	G7-S13
Category	Fitness Equipment
Language	English