Matrix MW001 User Manual

Getting to know your dishwasher
Starting a Programme
• Turn on the water tap
• Press the Power button.
• Press the Programme Selection button until the required programme light is illuminated.
When you close the door, the dishwasher will beep once and the programme will start automatically.
Interrupting the programme
If possible do not open the door once the programme has started.
• Firstopenthedoorslightlytoreducetheriskofwaterspillage.
• Waituntilthesprayarmhasstoppedturningbeforeopeningdoorfully.
• Whilstthedoorisopen,thedishwasherwillbeep10timesevery3seconds.
• Ifthedishwasherhasalreadyheatedup,thenleavethedooropentoallowthesteamtoescapetopreventthedoor
opening due to cabinet pressure.
At the End of a Programme
When the dishwasher programme is complete, the dishwasher will beep six times and the Programme Indicators will go
out. Open the dishwasher door.
• Press the Power button to switch off the dishwasher.
• Turn off the water tap and remove the plug from the power socket.
Please note: The dishwasher will automatically continue on the programme it has started if the door is
opened or in the event of a power cut.
MW001IN
Programme Indicator Lights
Programme
Selection Button
Salt
Indicator
Light
Quick Wash
Indicator Light
Quick Wash
Button
Delay Timer Indicator
Lights
Delay Timer
Button
Power
Button
Programme indicator lights
Programme selection button
Power button
a
d
e
f
g
h
b
c
Close-up view (control panel)
Dishwasher Interior
a Upper Rack
b Lower Rack
c Top Spray Arm
d Cutlery Basket
e Bottom Spray Arm
f Salt Container Cup
g Washing Filter
h Detergent and Rinse Aid
Dispenser
3

Matrix MW001 Specifications

General

Brand	Matrix
Model	MW001
Category	Dishwasher
Language	English