Softener Adjustment
The efficiency of your dishwasher depends on the softness of the tap water.
To ensure best efficiency, the dishwasher is equipped with a system that
reduces the hardness in the mains water supply. The efficiency will increase
when the system is correctly set. To find out the water harness level of your
water supply contact your local water board.
To set the softener adjustment system unscrew the cap from the salt container
and rotate the ring indicated in figure 4 according to the table below.
fig. 4
Water Hardness
Level Clarke
degrees
dH mmol/l Selector
position
Salt
consumption
(Grams/cycle)
Autonomy
(cycles/2kg)
1 0-14 0-17 0-1,7 / 0 /
2 14-36 18 - 44 1,8 - 4,4 “-” 20 60
3 36-71 45 - 89 4,5 - 8,9 MED 40 40
4 >71 >89 >8,9 “+” 60 25
To Next Page
Loading...
Need help?
General
