12
panel illuminates, you should refill the salt compartment with salt only –
do not add water to the salt compartment after the first use.
Important:
You should run a prewash programme immediately after adding
dishwasher salt, to prevent any damage to the dishwasher system.
Softener adjustment
The efficiency of your dishwasher depends on the softness of the
tap water. To ensure best efficiency, the dishwasher is equipped with
a system that reduces the hardness in the mains water supply. The
efficiency will increase when the system is correctly set. To find out the
water hardness level of your water supply you can use the test strip
supplied, or alternatively contact your local water board.
• Open the testing strip (Fig. 5).
• Run water through the tap for one minute.
• Hold the testing strip in water for one second.
• Remove from the water and shake the test strip to remove excess
water.
• Wait for one minute.
• Check the number of marks on the strip to see the level of water
hardness.
If the hardness of the water you use is above 63dE, or if you are using
Fig. 5
To Next Page
Need help?
General
Weight and Dimensions
