EasyManuals Logo
Home>Matrix>Dishwasher>MW200

Matrix MW200 User Manual

Matrix MW200
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
IMPORTANT: Never run a programme without the filters in place.
Incorrect fitting of the filters may reduce wash performance and
potentially damage your appliance.
Spray arms
You should clean the spray arms at least once a month.
Remove the lower basket.
Pull the lower spray arm upwards to remove it.
To remove the upper spray arm, first remove the nut on the upper spray
arm by turning it.
You should clean and rinse the spray arms thoroughly before replacing
them. Ensure that the upper spray arm nut is securely tightened when
refitting the upper spray arm.
Dishwasher interior
To deal with an accumulation of dirt, oil or limescale in the dishwasher,
run an intensive programme with detergent when the dishwasher is
empty.
Alternatively, there are specialist dishwasher cleaners available that can
be used.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix MW200 and is the answer not in the manual?

Matrix MW200 Specifications

General IconGeneral
Door colorGray
Control typeButtons
Product sizeSlimline (45 cm)
Built-in displayYes
Custom panel-ready-
Appliance placementFully built-in
Baskets adjustable placementUpper
Cycle time- min
Noise level52 dB
Dishwashing programsEco, Intensive, Pre-wash
Number of place settings10 place settings
Number of washing programs3
Connected load1900 W
Water consumption per cycle11 L
Energy consumption per cycle0.73 kWh
Weight and Dimensions IconWeight and Dimensions
Depth570 mm
Width448 mm
Height818 mm
Installation compartment height (max)870 mm

Related product manuals