6
3.1 recommenDeD cleaninG TiPS
3.2 cHeck for DamaGeD ParTS
Do noTuseanyequipmentthatisdamagedorhaswornorbrokenparts.UseonlyreplacementpartssuppliedbyMatrixFitnessSystems.
mainTain labelS anD namePlaTeS. Do not remove labels for any reason. They contain important information. If unreadable or
missing,contactMatrixFitnessforareplacementat866-693-4863orwww.matrixfitness.com.
mainTain all eqUiPmenT. Preventative maintenance is the key to smoothly operating equipment. Equipment needs to be inspected at
regularintervals.Defectivecomponentsmustbekeptoutofuseuntiltheyarerepaired.Ensurethatanyperson(s)makingadjustmentsor
performingmaintenanceorrepairofanykindisqualifiedtodoso.MatrixFitnessSystemswillprovideserviceandmaintenancetrainingat
our corporate facility upon request or in the field if proper arrangements are made.
cHaPTer 3: PrevenTaTive mainTenance
mainTenance ScHeDUlee
acTion freqUency
Clean entire machine using water and a mild soap or
otherMatrixapprovedsolution(cleaningagentsshouldbe
alcoholandammoniafree).
DAILY
Check harness for wear and secure connections. DAILY
Remove the front cover. Check for debris and clean with a
dry cloth or small vacuum nozzle.
MONTHLY
Lubricatetreadmillrunningdeck EVERY3MONTHS
rUnninG
belT
rUnninG
Deck
lUbricaTinG THe rUnninG belT
1. UsingaT-wrenchorAllenwrench,loosentherearrollerbolts10-15counter-clockwiseturns.Thisshouldgivethebeltenoughslackforyou
to lift it.
2. Liftthebeltasfarasyoucanandsquirtthesiliconeoilinazigzagpatternacrosstheentirerunningdecksurface.Use1/2bottleof100%
siliconeoillubricant.Donotapplythesiliconeoilontopoftherunningbelt.Laytherunningbeltdownandthentightenbothrearrollerbolts
clockwise the same number of turns loosened.
3. Walk on the machine at a comfortable speed for 3 minutes to spread the silicone and to check the running belt for proper tension and alignment.
4. Wipe any excess oil from the sides with a damp cloth.