16
CHAPTER 7: SERVICE MODE
7.1 USING SERVICE MODE
CUSTOM SETTINGS DESCRIPTION
Service 1 Display Test
Service 2 Keypad Test
Service 3 Accumulated Distance / Accumulated Time
Service 4 Error Log Message
1) To enter Service Mode, press & hold the INCLINE DOWN and
SPEED DOWN keys at the same time for 3-5 seconds until Manager
Mode appears on the display.
2) Press the INCLINE or SPEED keys until Service Mode appears on
the display (Figure A) and press ENTER.
3) To scroll between settings in the Service Mode, press the INCLINE
or SPEED keys.
4) Press ENTER to modify the settings once displayed.
5) Press any INCLINE or SPEED key to change the value of the set-
ting.
6) Once the setting is correct, press ENTER to save.
7) Press the EMERGENCY STOP to exit Service Mode..
7.2 SERVICE MODE OVERVIEW
FIGURE A
To Next Page
Loading...
Need help?
General
