13
1) To enter Manager Mode, press & hold INCLINE DOWN and
SPEED DOWN keys at the same time for 3-5 seconds until Manager
appears on the display.
2) To enter the Manager Mode, press ENTER once Manager Mode
appears on the display (Figure A).
3) To scroll between settings in the Manager Mode, press the
INCLINE or SPEED keys.
4) Press ENTER to modify the settings once displayed.
5) Press any INCLINE or SPEED key to change the value of the set-
ting.
6) Once the setting is correct, press ENTER to save.
7) Press the EMERGENCY STOP to exit Manager Mode..
5.1 USING MANAGER MODE
FIGURE A
CUSTOM
SETTINGS
DEFAULT MINIMUM MAXIMUM UNIT DESCRIPTION
MAXIMUM TIME 60 5 99 MINUTE Maximum workout duration.
DEFAULT TIME 60 5 99 (limited to max
time setting)
MINUTE Default start time in all programs.
DEFAULT LEVEL 1 1 10 LEVEL Default start level in all programs.
DEFAULT AGE 30 15 100 AGE Default age used in HR programs.
DEFAULT
WEIGHT
150 LB / 68
KG
50 LB / 23 KG 400 LB / 182 KG POUND /
KILOGRAM
Default weight used in calorie calculations
and HR programs.
ACCUMULATED
DISTANCE
N/A N/A 65,000 MILES /
104,000 KM
MILE / KILOMETER Total distance on treadmill, not editable. TO
RESET: Press and hold INCLINE DOWN and
SPEED DOWN for 3-5 seconds.
ACCUMULATED
TIME
N/A N/A 65,000 HOURS HOUR Total time on treadmill, not editable. TO
RESET: Press and hold INCLINE DOWN and
SPEED DOWN for 3-5 seconds.
SOFTWARE N/A N/A N/A N/A Software Version, not editable.
START SPEED 0.5 MPH /
0.8 KPH
0.5 MPH / 0.8
KPH
2.0 MPH / 3.2 KPH MPH / KPH Controls the starting speed for all programs
(does not affect minimum speeds).
MAXIMUM
SPEED
12 MPH / 20
KPH
2.0 MPH / 3.2
KPH
12 MPH / 20 KPH MPH / KPH Controls the maximum speed for all
programs.
TIMER MODE DOWN DOWN UP N/A Controls whether the user time counts up or
down.
SPEED MODE MILE MILE KILOMETER N/A Measurement unit used for calorie
calculations, distance, and speed.
OUT OF ORDER OFF OFF ON OFF OR ON Locks the machine.
GENDER MALE MALE FEMALE N/A Sets the user's gender.
LANGUAGE ENGLISH N/A N/A N/A Sets the language shown on the console.
SOUND MODE ON ON OFF N/A Controls whether the display broadcasts
chime when buttons are pressed.
BELT STOP OFF OFF 30, 60, OR 90
SECONDS
SECONDS This option checks for a user on the running
belt. If there is no user detected, the unit will
go into pause mode, and reset if no user for
5 minutes.
5.2 MANAGER MODE OVERVIEW
CHAPTER 5: MANAGER MODE
To Next Page
Loading...
Need help?
General
