110
10.5 ENTERING THE SERIAL NUMBER INTO THE CONSOLE
ONCE INSTALLATION IS COMPLETE, THE CONSOLE AND PLATFORM SERIAL NUMBERS SHOULD BE
ENTERED INTO THE CONSOLE.
1) Press ENTER, 3, 0, 0, 1, ENTER on the number keypad and Service Mode will appear on the display.
2) Press Serial Number on the display.
3) Choose Platform (Figure A) or Console (Figure B).
4) Enter the serial number of the console or platform using the number keypad. Only the final 9 digits of the serial number should be entered.
5) Repeat this procedure so that both the console and platform serial numbers are entered.
6) Press the EMERGENCY STOP or the HOME key to return to normal function.
FIGURE A
FIGURE B
CHAPTER 10: TREADMILL SPECIFICATIONS AND ASSEMBLY GUIDE
To Next Page
Loading...
Need help?
General
