1.01
Symbols in the manual
In this manual some symbols are used that to attract the reader’s attention and underline some particu-
larly important aspects of the treatment.
The table below gives the list and describes the meaning of the different symbols used.
MEANING and NOTES
Danger
It indicates a danger with the risk for accident, even fatal, for the user.
Pay careful attention to text block with this symbol.
Warning
It warns against a possible deterioration of the machine or personal item of the user.
Notice
It shows either a notice or a note on the key functions or useful information.
Further information
This symbol introduces text blocks containing further information.
This information has no direct relationship with the description of a function or with pro-
cedure development.
They could be cross-references to other documents or other sections of this manual.
Damage risk
It indicates a high damage risk of a piece, for example, using a wrong tool or by mounting
something with the incorrect procedure.
Visual Check
It recommends the reader to carry out a visual check. This symbol can also be found in
the instructions for use. The user is required to read a measure value, to check some
warning signs, etc.
Acoustic Check
It recommends the reader to carry out a sound acoustic check.
This symbol can also be found in theinstructions for use. The user is required to listen to
an operational noise.
SYMBOL
General Information
TI008G0001
☞
!
098
To Next Page
Loading...
Need help?
General
