5
8. The MCD1000 Compact Disc Player is designed to play all
standard CD Discs that conform to the Official Compact
Disc Standards which is indicated by the Symbol. It
will also play most CD-R discs, however some discs may
not be able to play due to the condition of the recording.
Super Audio Compact Discs (SACD) that are labeled
Hybrid, have a CD Compatible Layer for 2-channel sound
reproduction and will play on the MCD1000. DVD Discs
that are labeled Dual Disc, have one side that is a standard
CD for 2-channel sound reproduction and will play on the
MCD1000.
9. Compact Discs that are not round (e.g. Novelty discs with
octagonal or heart shapes) will not play properly in the
MCD1000 and should not be tried, as possible damage may
occur.
10. To assure the best possible sound reproduction and proper
operation of the MCD1000, the information side of the CD
disc to be played should be as clean as possible.
11. The following list of Compact Disc Accessories should not
be used with the MCD1000:
A. Compact Disc Stabilizers.
B. Disc Protectors.
C. Lens/Laser Cleaning Discs and devices.
Introduction and Performance Features
XLR Connectors:
Below is the Pin configuration for the XLR Balanced Digi-
tal Audio Output Connectors on the MCD1000. Refer to the
diagram for connection:
PIN 1: Shield/Ground
PIN 2: + Signal
PIN 3: - Signal
Power Control and Trigger Connectors
The MDA1000’s Power Control Outputs provide a 5 volt
signal. Use a 1/8 inch stereo mini phone
plug to connect to the Power Control In-
put on other McIntosh Components.
Data and IR Port Connectors
The MDA1000’s Data Port Output provides Remote Con-
trol Signals and the IR
Input Port allows for the
connection of other
brands IR Sensors. Use a
1/8 inch stereo mini
phone plug to connect to
the Data Port Inputs on
McIntosh Source Units.
Connector Information
Positive
N/C
Ground
IR Input Port Connector
Data Signal
Ground
N/C
Data Signal
N/C
Data Ground
Data Port Connector
Pin 1
Pin 2
Pin 3
••
••
• Advanced Transport
The MCD1000 has a custom designed precision-machined
metal disc tray for safe and gentle disc handling. The servo-
controlled transport with a shock resistant suspension incor-
porating the latest in error correction circuitry for reading
imperfect discs.
••
••
• Four Playback Modes
The MCD1000 Compact Disc Player allows for Disc Play-
back, Intro Playback, Program Playback and Random Play-
back.
••
••
• Front Panel Display
The Display indicates the Disc, Track and Time information
along with the Playback Mode in use.
••
••
• Remote Power, Data Control and External IR Input
Remote Power Control In/Out allows the MCD1000 to turn
On/Off with a McIntosh Audio Control Center. The Data
Port Input allows Remote Control Operation from another
McIntosh Component. The IR Input allows for the connec-
tion of an IR Receiver.
••
••
• Special Power Supply
A fully regulated Power Supply with a special R-Core
Power Transformer, ensures stable noise free operation even
though the power line varies.
••
••
• Fiber Optic Solid State Front Panel Illumination
The Illumination of the Glass Front Panel, with a three di-
mensional look, is accomplished by the combination of cus-
tom designed Fiber Optic Light Diffusers and extra long life
Light Emitting Diodes (LEDs). This provides even Front
Panel Illumination and is designed to ensures the pristine
beauty of the MCD1000 will be retained for many years.
••
••
• Machined Top and Side Panels
The Top and Side of the MCD1000 are machined from
thick aluminum panels with a smooth black anodized finish.
In the recessed area of the Top Panel is a screened glass
panel with a block diagram of the MCD1000’s circuitry.
Introduction
Performance Features
The McIntosh MCD1000 CD Transport offers the latest in
technology and provides state of the art reproduction of
Compact Discs. A full complement of performance features
together with the advanced mechanical design ensures many
years of smooth trouble free operation.
To Next Page
Loading...
Need help?
General
