413
Technical data
Fuels, coolants, lubricants etc.
Windshield and headlamp washer
system
Both the windshield and headlamp washer
systems are supplied from the windshield
washer fluid reservoir.
The washer fluid reservoir has a capacity of
approximately:
앫 7.4 US qt. (7 l) in vehicles with a head-
lamp cleaning system* or heated reser-
voir
앫 4.8 US qt. (4.5 l) in vehicles without a
headlamp cleaning system
왘 Refill the reservoir with MB Windshield
Washer Concentrate and water (or con-
centrate and commercially available
premixed windshield washer
solvent/antifreeze, depending on am-
bient temperatures).
Windshield and headlamp washer fluid
mixing ratio
For temperatures above “freezing point”,
use MB Windshield Washer Concentrate
“S” and water:
앫 1 part “S” to 100 parts water
[40 ml “S” to 1 gallon (4 liters) water].
For temperatures below “freezing point”
use MB Windshield Washer Concentrate
“S” and commercially available premixed
windshield washer solvent / antifreeze:
앫 1 part “S” to 100 parts solvent
[40 ml “S” to 1 gallon (4 liters) solvent].
Warning G
Washer solvent/antifreeze is highly flam-
mable. Do not spill washer
solvent/antifreeze on hot engine parts, be-
cause it may ignite and burn. You can be se-
riously burned.
To Next Page
Loading...
Need help?
General
