47
Getting started
Driving
Turn signals and high beam
The combination switch is located on the
left of the steering column.
Combination switch
1 Turn signal, right
2 Turn signal, left
왘 Press the combination switch up 1 or
down 2.
The corresponding turn signal indicator
lamp L or K flashes in the in-
strument cluster.
High beam
왘 Push the combination switch forward.
The high beam headlights are switched
on.
The high beam symbol A in the
tachometer comes on.
More information can be found in the
“Controls in detail” section (
컄 page 127).
Windshield wipers
The combination switch is located on the
left of the steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
왘 Make sure the ignition is switched on.
All the lights in the instrument cluster
come on.
i
To signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal flashes three times.
To Next Page
Loading...
Need help?
General
