puter displays warnings and the status of the
driving systems in colour. Please read the
operating
instructions on the distance control
assistant (Y page 271) and Lane Keeping
Assist first (Y page 283)
X
Switch on distance control assistant
and/or Lane Keeping Assist.
X
Use the u or t button to scroll to à
driving mode.
X
To show distance, speed and lane mark-
ings:
use the r or s button to scroll
to the Assistance menu window.
The menu window shows:
R
the vehicle speed of the detected vehicle
and the distance to the detected vehicle
(distance control assistant)
R
the lane markings (Lane Keeping Assist)
Backup drive mode menu window
General notes
If
the automated transmission shift system is
malfunctioning, you may, under certain cir-
cumstances, be able to continue your journey
in backup drive mode. It is not possible to
change gear in backup drive mode when the
vehicle is in motion.
The vehicle may respond abnormally in
backup drive mode and therefore requires a
high level of concentration on the part of the
driver.
Backup drive mode remains switched on for
as long as the ignition lock is in the drive
position. When you take the key out of the
ignition lock, backup drive mode is switched
off. If backup drive mode is used when the
transmission is cold, the on-board computer
may not show the selected gear. Repeat the
gear selection. If the on-board computer does
not display the selected gear after you have
tried to select a gear several times, switch off
the engine. Start the engine again and select
the gear.
Selecting a shift position
X
Apply the parking brake.
X
Start the engine.
X
Use the u
or t button to scroll to à
driving mode.
X
Use the r
or s button to scroll to the
Backup drive mode menu window.
The menu window shows the Activate
with "OK" message.
X
Press the 9 button.
The menu window shows the Engage
parking brake message.
X
Press the u button.
The input window shows:
R
R for reverse gear
R
N for neutral
R
D1 for the slow gear,
2nd gear
R
D2 for the fast gear, 6th gear
R
ï for towing mode
X
Select the desired gear, neutral position or
towing
mode with the r or s button
and confirm your selection with the u
button.
The on-board computer displays the selec-
ted direction of travel in the status area.
X
When the menu window shows the Ready
to start for 10 seconds message,
depress the accelerator pedal.
If you are driving in backup drive mode,
Shift to neutral? appears in the event
window.
You can only shift to neutral position
if the vehicle is in motion.
You can find information on towing in the sec-
tion "Manoeuvring, tow-starting and towing
away" (Y page 391).
Video menu window
The Video
menu window is available for vehi-
cles fitted with a reversing camera without a
Bluetooth
®
radio/ navigation system, com-
fort.
On-board computer
151
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
