General Features
• Steering friction adjustment (if equipped) ‑ Adjust this lever to achieve the
desired steering friction (drag) on the tiller handle. Move the lever to the
starboard to increase the friction, or move the lever to the port to
decrease the friction. A quick reference decal is located on the transom
clamp.
!
WARNING
Insufficient friction adjustment can cause serious injury or death due to loss
of boat control. When setting the friction adjustment, maintain sufficient
steering friction to prevent the outboard from steering into a full turn if the
tiller handle or steering wheel is released.
Tiller handle model
shown
a - Friction adjustment
lever
b - Decal
c - Increase fricton
d - Decrease friction
To Next Page
Loading...
Need help?
General
