Mercury 15 EFI SeaPro User Manual

2. Lift up the rear of the cowl and push it towards the front of the engine to
clear the front hook.
63227
INSTALLATION
1. Engage the front hook and position the cowl over the engine.
2. Lock the rear latch.
Battery Inspection
The battery should be inspected at periodic intervals to ensure proper engine
starting capability.
IMPORTANT: Read the safety and maintenance instructions which accompany
your battery.
1. Turn off the engine before servicing the battery.
2. Ensure the battery is secure against movement.
3. Battery cable terminals should be clean, tight, and correctly installed.
Positive to positive and negative to negative.
4. Ensure the battery is equipped with a nonconductive shield to prevent
accidental shorting of battery terminals.
Exterior Care
Your outboard is protected with a durable baked enamel finish. Clean and wax
often using marine cleaners and waxes.
MAINTENANCE
eng 75

Mercury 15 EFI SeaPro Specifications

General

Brand	Mercury
Model	15 EFI SeaPro
Category	Outboard Motor
Language	English