FEATURES & CONTROLS
28
3054
a
b
a - Shallow water drive lever b - Cooling water intake
IMPORTANT: While in shallow water drive position, do not operate the outboard in reverse. Operate the
outboard at slow speed and keep the cooling water intake submerged.
3. To release down to run position, lift up the shallow water drive lever. Tilt up the outboard to disengage
the shallow water drive lock and lower it down.
3057
Setting The Operating Angle Of Your Outboard
The vertical operating angle of your outboard is adjusted by changing the position of the tilt pin in the five
adjustment holes provided. The outboard should be locked against this tilt pin by setting the tilt lock lever to the
lock/run position. Proper adjustment allows the boat to achieve optimum performance, stability, and minimize
steering effort.
NOTE: Refer to the following lists when adjusting the operating angle of your outboard.
The tilt pin should be adjusted so the outboard is positioned to run perpendicular to the water when the boat is
running at full speed. This allows the boat to be driven parallel to the water.
Arrange passengers and load in the boat so the weight is distributed evenly.
To Next Page
Loading...
Need help?
General
