FEATURES AND CONTROLS
eng 57
2. Trim switch (if equipped) ‑ Pressing the trim switch allows
the engine to trim up or down.
5185
3. Control handle tension adjustment screw ‑ This screw can
be adjusted to increase or decrease the tension on the
control handle (cover must be removed). This will help
prevent unwanted motion of the remote control handle in
rough water. Turn the screw clockwise to increase tension
and counterclockwise to decrease tension. Adjust to the
desired tension.
4. Detent tension adjustment screw ‑ This screw can be
adjusted to increase or decrease the effort to move control
handle out of detent positions (cover must be removed).
Turning the screw clockwise will increase tension. Adjust to
the desired tension.
a - Detent tension adjustment
screw
b - Control handle tension
adjustment screw
5. Arrow trackpad ‑ Navigates through the System View
on‑screen function messages.
To Next Page
Loading...
Need help?
General