8. : Distributes air through the instrument panel and floor vents.
9.
: Distributes air through the instrument panel vents.
10. Manual override controls: Allows you to manually select where
airflow is directed. To return to full automatic control, press AUTO.
11.
Front fan speed control: Press to manually increase or
decrease the fan speed. To return to automatic fan operation, press
AUTO.
12. EXT: Press to display outside temperature. Press again to display
cabin temperature settings.
13. F/C (Temperature conversions): Press to switch temperature
display between ° Fahrenheit and ° Celsius.
14. OFF: Outside air is shut out and the climate control system is turned
off.
15. Driver temperature control: Press to increase/decrease the
temperature on the driver side of the cabin. Sets the passenger side
temperature also when DUAL is disengaged. The recommended vehicle
cabin setting is between 72°F (22°C) and 75°F (24°C).
Dual temperature control: Press and hold the AUTO button to
engage-disengage separate passenger side temperature control.
16. AUTO: To engage automatic temperature control, press AUTO and
select the desired temperature using the temperature control. The
system will automatically determine fan speed, airflow location, A/C on
or off, and outside or recirculated air, to heat or cool the vehicle to reach
the desired temperature.
2006 Montego (mgo)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
40
To Next Page
Loading...
Need help?
General
