Mercury 225 OptiMax DTS User Manual

200/225 OPTIMAX DTS
90-10234050 Page 33 / 42
2. Connect the remote oil hoses to the engine hose connections. Fasten hose
connections with cable ties.
a
d
c
3767
b
e
a - Hose clamp
b - Cable tie
c - Oil hose without blue stripe
d - Oil hose with blue stripe
e - Remote fuel hose
Filling the Fuel System
When starting an engine for the first time, or starting an engine that ran out of fuel or was
drained of fuel, fill and prime the fuel system.
1. Squeeze the fuel line primer bulb until it feels firm.
ob00349
2. Turn the key switch to the "ON" position for three seconds. This operates the electric
fuel pump.
ob00364
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
3484
3. Turn the key switch back to the "OFF" position and squeeze the primer bulb again
until it feels firm.
ob00360
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
3482
4. Turn the key switch to the "ON" position again for three seconds.
5. Continue this procedure until the fuel line primer bulb stays firm.
Filling the Oil System
1. Fill the remote oil tank with the recommended oil listed in the Operation and
Maintenance Manual.

Mercury 225 OptiMax DTS Specifications

General

Brand	Mercury
Model	225 OptiMax DTS
Category	Outboard Motor
Language	English