Mercury 25 Jet 4-Stroke User Manual

TRANSPORTING
30
Trailering Boat/Outboard
The boat should be trailered with the outboard tilted down in a
vertical operating position.
IMPORTANT: Do not rely on the power trim/tilt system or tilt
support lever to maintain proper ground clearance for trailering.
The outboard tilt support lever is not intended to support the
outboard for trailering.
If additional ground clearance is required, the outboard should be
tilted up using an accessory outboard support device. Refer to your
local dealer for recommendations. Additional clearance may be
required for railroad crossings, driveways and trailer bouncing.

Mercury 25 Jet 4-Stroke Specifications

General

Horsepower	25 HP
Engine Type	4-Stroke
Full Throttle RPM Range	5000-6000 RPM
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	15" / 20"
Gear Ratio	2.08:1
Recommended Fuel	87 octane / up to 10% ethanol
Starting	Electric
Weight	71 kg / 157 lbs (Lightest Model Available)
Steering	Tiller
WOT RPM	5000-6000 RPM