MAINTENANCE
77
CHECKING SHIFT LINK ROD ADJUSTMENT
Check the shift link rod adjustment in forward shift position. The
correct adjustment will position the shift cam far enough on the
roller in order to lock the reverse gate into forward position. The
reverse gate should not be able to be forced up towards neutral.
Pull on the reverse gate by hand to verify.
ob01415
a
b
c
d
a - Shift link rod
b - Shift cam
c - Roller
d - Reverse gate
ADJUSTING SHIFT LINK ROD
1. Place the shift handle into full forward shift position.
2. Adjust the length of the shift link rod so the roller is at the full
end of travel (bottom) in the shift cam when the shift handle is
in forward.
Battery Inspection
The battery should be inspected at periodic intervals to ensure
proper engine starting capability.
IMPORTANT: Read the safety and maintenance instructions
which accompany your battery.
1. Turn off the engine before servicing the battery.
2. Add water as necessary to keep the battery full.
3. Make sure the battery is secure against movement.
To Next Page
Loading...
Need help?
General
