FUEL AND OIL
eng 59
REMOVING THE FUEL CAP
a - Fuel cap
b - Manual vent screw
c - Tab lock
IMPORTANT: Contents may be under pressure. Rotate the fuel
cap 1/4 turn to relieve pressure before opening.
1. Open the manual vent screw on top of the fuel cap.
2. Turn the fuel cap until it contacts the tab lock.
3. Press down on the tab lock. Rotate the fuel cap 1/4 turn to
relieve the pressure.
4. Press down on the tab lock again and remove the cap.
DIRECTIONS FOR USING THE PRESSURIZED PORTABLE
FUEL TANK
1. When installing the fuel tank cap, turn the cap to the right
until you hear a click. This signals that the fuel cap is fully
seated. A built‑in device prevents overtightening.
2. Open the manual vent screw on top of the cap for operation
and cap removal. Close the manual vent screw for
transportation.
3. For fuel hoses that have quick disconnects, disconnect the
fuel line from the engine or fuel tank when not in use.
4.
Follow Filling Fuel Tank instructions for refueling.
Filling Fuel Tank
!
WARNING
Avoid serious injury or death from a gasoline fire or explosion.
Use caution when filling fuel tanks. Always stop the engine and
do not smoke or allow open flames or sparks in the area while
filling fuel tanks.
To Next Page
Loading...
Need help?
General
