OPERATION
36
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and follow procedure.
1. Remove flywheel cover.
WARNING
When using emergency starter rope to start engine, the start in gear protection device is inoperative. Make sure
to set the outboard gear shift into neutral to prevent outboard from starting in gear. Sudden unexpected
acceleration could result in serious injury or death.
2. Shift outboard to neutral (N) position.
3. Turn the ignition key to "ON" position.
4. Set the lanyard stop switch to the "RUN" position. Refer to General Information - Lanyard Stop Switch.
To Next Page
Loading...
Need help?
General
