1
Motherboard User’s Guide
Chapter 1 Introduction
This motherboard has a VIA C3 CPU onboard with front-side
bus speed up to 133MHz.
This motherboard integrates the VIA CLE266 Northbridge and
8235 Southbridge chipsets that support DDR 266MHz, Ultra
DMA 33/66/100/133 function and remarkably high system
performance under all types of system operations
It supports built-in USB 2.0 providing higher bandwidth. It
implements Universal Serial Bus Specification Revision 2.0
and is compliant with UHCI 1.1 and EHCI 1.0.
The motherboard supports the built-in AC’97 Codec, two 32-bit
PCI slots, one CNR (Communications and Networking Riser)
slot, and an onboard 10BaseT/100BaseTX Network interface
(optional). This motherboard integrates a 128-bit 3D/2D
graphics engine and a high-performance 3D accelerator.
In addition, this motherboard has a full set of I/O ports including
two PS/2 ports for mouse and keyboard, one serial port, one VGA
port, one parallel port. one LAN port (optional), audio jacks for
microphone, line-in and line-out, four back-panel USB2.0 ports
and onboard USB header USB1 providing two extra ports by
connecting the extended USB module to the motherboard.
This motherboard has all the features you need to develop a
powerful multimedia workstation. The board is FLEX ATX size
and has a power connector for an ATX power supply.
To Next Page
Loading...
Need help?
General
