Mercury Quicksilver Series User Manual

• Hold onto the lifeline fixed to the top of the hull side tubes.
• Hold your breath and duck down while holding onto the lifeline. Kick down
hard to force your body upwards. Your aim is to get as much momentum
as possible. As your body is coming up, use your arms to push down on
the hull tube to get your stomach onto the tube and your upper body as
far into the boat as you can.
• Using your arms, press down onto the floor close to hull tube to get the
rest of your body over the tube and into the boat. Use one hand to reach
the opposite lifeline to assist if possible.
• Proceed immediately to shore or mother ship whichever is nearest. If the
above procedure does not work, reach into the boat and partly deflate the
side hull tube by 50% and repeat the above procedure.
Quicksilver Inflatable Specifications
Tendy (Light Tender)
Specification
Model
200 Tendy
Slatted
200 Tendy Air
Floor
240 Tendy
Slatted
240 Tendy Air
Floor
Fabric PVC PVC PVC PVC
Length (m) 2.00 2.00 2.40 2.40
Beam (cm) 134 134 134 134
Tube diameter (cm) 35 35 40 40
Weight (kg) 16.8 21.8 18.8 23.8
Maximum HP 3.5 3.5 4 4
Transom height Short Short Short Short
Person capacity 2 2 + 1 3 3
Number of air
chambers
3
3 + keel +
floor
3
3 + keel +
floor
Recommended air
pressure
0.25 bar 0.25 bar 0.25 bar 0.25 bar
Keel No keel Inflatable keel No keel Inflatable keel
Floor system
Slatted
floor
Inflatable air
floor
Slatted
floor
Inflatable air
floor
ISO standard 6185 6185 6185 6185
CE category D D D D
GENERAL INFORMATION
eng 13

Mercury Quicksilver Series Specifications

General

Brand	Mercury
Model	Quicksilver Series
Category	Boat
Language	English