Mercury SC1000 User Manual

WARNING SYSTEM WITH DESCRIPTIVE TEXT
9
Alarm Warnings with Descriptive Text
NOTE: Descriptive text alarm warning screens are displayed with
Gen I (2007) engines and newer.
22642
MODE
RPM x 1000
0
2
3
4
5
6
7
1
RESET
TROLL
+
TROLL
-
SPEED
0
20
30
40
50
60
70
10
RESET
TROLL
-
MODE
+
TROLL
SELECT
0
2
3
4
5
6
7
1
RESET
RPM x 1000
SMART TOW
When a problem is detected, the "SYS FAULT" alarm appears on
the display. Press the "+" button to show the faulty component. The
upper bar in this screen displays the system where the fault is
located. The faulty component is described in the scrolling text.
Press the "+" button for more information. This screen gives a
detailed description of the fault in the scrolling text. Press the "+"
button to view the required corrective action.
The alarm message will stay displayed until the "-" button is
pressed. If there are multiple alarms, press the "MODE/SELECT"
button to display.
If problem can cause immediate engine damage, the Engine
Guardian System will respond to the problem by limiting engine
power. Immediately reduce the throttle speed to idle and refer to
the warning messages on the following pages. Refer to the
appropriate service manual for further explanation of the problem
and the correct action to take.
If the "MODE/SELECT" button is pressed to display a different
screen, the flashing alarm signal "AL" will appear in the upper right
corner to indicate there still is a problem.
Alarm Warning with Descriptive Text
[ SHOW ]
SYS FAULT
24184
The "SYS FAULT" bar indicates there is a
problem in the system. "SHOW" displays
the faulty component.

Mercury SC1000 Specifications

General

Brand	Mercury
Model	SC1000
Category	Measuring Instruments
Language	English