Mercury SC1000 User Manual

TACHOMETER CALIBRATION
26
Tachometer Quick CAL Calibration
SELECT
0
2
3
4
5
6
7
1
RESET
RPM x 1000
SMART TOW
MODE
RPM x 1000
0
2
3
4
5
6
7
1
RESET
TROLL
+
TROLL
-
24157
SC1000 Smart Tow
Tachometer
SC1000 System Tachometer
This calibration is for setting lighting and contrast.
1. Press the "MODE/SELECT" and "+" buttons simultaneously
for approximately two seconds or until the "QUICK CAL"
screen appears.
2. Press the "-" or "+" button to select the option choice displayed
in the [ ] brackets on the screen.
3. Press "MODE/SELECT" ["SAVE"] to save the setting and
advance through the calibration screens.
Quick CAL
LIGHT
(DOWN)
(SAVE) ( UP )
23517
Adjusts the brightness of the gauge lighting.
CONTRAST
(DOWN)
(SAVE) ( UP )
23519
Adjusts the contrast of the display screen.
Tachometer CAL 1 Calibration
This calibration lets you turn the system screens on and off.
NOTE: The screens may vary depending upon the version of the
gauge.

Mercury SC1000 Specifications

General

Brand	Mercury
Model	SC1000
Category	Measuring Instruments
Language	English