Smart Tow
Tachometer
System Tachometer System
Speedometer
Power up: Each gauge will power up when the ignition is turned
on. The gauges will stay on as long as the ignition is on.
Lights: Adjusts the brightness and contrast of the gauge.
Buttons: The "MODE/SELECT" button is used for selecting
information screens. The "+" and "-" buttons are used for setting
engine speed during troll, cruise control, and setting gauge
calibrations.
Troll Control: Sets and controls the idle speed of the engine for
trolling without using the throttle. (System Tachometer and
Speedometer).
Cruise Control: Sets and controls the speed of the engine for
cruising. (Smart Tow Tachometer only).
Launch Control: Sets and controls the speed of acceleration from
idle to set cruise speed. (Smart Tow Tachometer only).
Engine Guardian System: Monitors the critical sensors on the
engine for any early indications of problems. The system will
respond to a problem by reducing engine speed and alert the
operator to a potentially damaging situation.
Warning System: The system sounds the warning horn and
displays the warning message.
Master Reset
Returns the gauge to the factory defaults through the Master Reset
command.
To Next Page
Loading...
Need help?
General
