EasyManuals Logo
Home>Mercury>Gateway>SCC-1

Mercury SCC-1 User Manual

Mercury SCC-1
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
IMPORTANT:Remove the Mercury Avator battery from the outboard motor before performing inspections, assembly,
maintenance, and repair activities.
Only use the provided handles to carry the Mercury Avator battery.
Keep the Mercury Avator battery away from children.
Keep the Mercury Avator battery away from objects that may cause short circuits, like tools, screws, nails, watches,
bracelets, necklaces, keys, or other metal objects.
Handle the Mercury Avator battery with care. Do not crush the Mercury Avator battery or subject it to mechanical shock.
Keep the Mercury Avator battery away from sources of heat and fire.
Do not place the Mercury Avator battery in the presence of flammable vapors or in flammable dust environments.
3. Remove the front cowl upper panel from the outboard. Refer to the Mercury Avator 7.5e Operation and Installation
Manual Front Cowl Upper Panel Removal.
4. Remove the front cowl lower panel from the outboard. Refer to the Mercury Avator 7.5e Operation and Installation
Manual Front Cowl Lower Panel Removal.
5. Remove the starboard cowl panel from the outboard. Refer to the Mercury Avator 7.5e Operation and Installation Manual
Starboard Cowl Panel Removal.
6. Remove and discard the weatherproof connector cover from the 10‑pin data harness connection.
76053
7. Connect the 10‑pin connector on the SmartCraft CONNECT to the outboard wiring harness connector.
8. Verify the connectors are connected by pulling on the connections.
NOTE:The connectors should be aligned and seated flush for a proper connection.
IMPORTANT:Do not secure the SmartCraft CONNECT to the main battery bracket assembly. The cable ties will
interfere with the battery.
9. Install the SmartCraft CONNECT on the outboard and secure the SmartCraft CONNECT harness to the outboard with
the cable ties.
a - SmartCraft CONNECT
b - Cable tie
c - SmartCraft CONNECT harness
d - 10‑pin connector
a
b
b
b
c
76061
d
SCC-1 SMARTCRAFT CONNECT GATEWAY INSTALLATION MANUAL
90-8M0219240 eng MAY2023 © 2023 Mercury Marine Page5 / 23

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury SCC-1 and is the answer not in the manual?

Mercury SCC-1 Specifications

General IconGeneral
BrandMercury
ModelSCC-1
CategoryGateway
LanguageEnglish

Related product manuals